How to install the hard drive in pc? A Complete Guide
Hard drives are data storage devices that a computer uses to store an operating system, files, documents, and applications of a computer. You can install your hard drive in a PC to get more space for your computer storage or you can upgrade or replace the hard drive on the PC for window 7 or 10. Best Steps for How to install the hard drive in pc.
Installing a hard drive on a PC is one of the most easiest and straightforward steps. This is a better option than using external drives that are slower and may be dropped and inappropriate. This process requires no more than increasing it, connecting a couple of cables, and requires the formatting of the drive for use. There are a few things which you should know to make installation as easy as possible. How to replace the hard drive in a desktop is one of the easiest ways to improve your speed of PC and performance.
How to install the hard drive in pc.
If you are looking for more storage then you can install or replace your hard drive with an old one. This is not a complicated task to install a new hard drive for pc or to install a new hard drive for window7 on the laptop because you are not going to completely upgrade a PC. When you are looking for more storage or the speed boost an SSD provides then a hard drive upgrade is one of the easiest ways to improve your PC.
If you use the right tools and have a little help to install a hard drive for a PC. You are here to know that how to install the hard drive on a PC and how to upgrade the hard drive with a new hard drive on your existing PC. If you need more help about that which is the best for your pc then you should know about the basic buying consideration to install the graphic cards.
If you know some basic tips related to the hard drive then you can buy a hard drive for installing or upgrade in PC. The shopping for the hard drive is not too difficult just understand the guideline which is discussed here. How to install the hard drive in pc in an easy way.
The first consideration when you buy the new hard drive for your PC, you need SSD while SSD has the same functions as the hard drive. It is the type of data drive that uses for flash memory. Just think about it SSD is like a USB or SD card. But how important is that difference between SSD and USB?
SSD has no moving parts that make a noise. SSDs read and write data faster.
Size and interfaces of hard drive
IN HDDs, data is stored on a spinning metal disk which means more disks are needed for great data capacity. Desktop HDDs inclines to be 3.5 inches with a maximum capacity of 12TB, while laptop HDDs tend to be 2.5 inches with a maximum capacity of 5TB.
Specification and performance
A larger cache enables the data to transfer faster because more information can be stored at one time. Modern HDDs can have cache sizes ranging from 8MB to 256MB. More information can store at one time when a large cache enables the data to transfer faster. HDDs come in a wide range of capacities, covering out at 16TB per drive due to physical limitations.
Steeps ForHow to install the hard drive in pc
Step 1- Make sure that you are using a window 7 or 10 on your PC.
It is possible to replace an iMac hard drive but if you are doing it then it could be difficult for you and your warranty will finish. On the other hand, it is very easy to install and replace the hard drive on your desktop or PC.
Check your window which is the window you are using. If your window is window 7 or window 10 then it’s perfect, you should hear to know about that how to install the hard drive.
Step 2- Back up the data of your PC.
You can store your precious data if you are going to remove or install the hard drive from your PC. If you want to keep your original hard drive installed then you should consider installing a second hard drive instead.
Step 3- Materials for installing the hard drive.
- SATA cable (your speed of PC depends on the speed of SATA)
- Flathead screwdriver
- SATA hard-drive ()
Step 4- Make sure you can install a new hard drive on Your PC
At first, make sure that you can install a new hard drive before going to purchase the new hard drive. If you want to install a second hard drove on your desktop or PCthen you should have an expansion slot that allows you to install a second hard driveon your desktop or PC.
Step 5- Prepare your PC to install a new hard drive
- This is very important to know that when your computer is unplugged then do not perform any task on it.
- Take screw off to open the case of the computer.
- Open the case of PC.
Step 6- Buy a hard drive that is compatible with your PC.
- SATA is the most common hard drive for all types of computers. Some motherboards support M.2 SSD hard drive which is smaller and faster than others.
- All-in-one PC monitors required a 2.7” SATA drive.
Step 7- Take care of your ground before opening the panel of the PC
You can ground yourself before touching the metal when you are working with a PC or other things.
Step 8- Remove the old drive in your PC
Make sure all cables should disconnect from your motherboard and power supply when you remove the old hard drive from your computer.
Step 9- Connect the new hard drive to installing in your PC
There is much kind of SATA ports in the motherboard. SATA ||| is faster than SATA ||.
Step 10- Secure your new hard drive
If you have been inserted the new hard drive then use screws to make it secure. You will tight these screws but if you do too much tight it can be damage.
Step 11- Attach the hard drive to your motherboard
The new computer will use SATA cables because they are thin and resemble USB cables. You will use a SATA cable to connect the hard drive to your motherboard.
Step 12- Connect the power supply with the hard drive
Make sure that no cable can come undone by twisting them a little bit.
Step 13- Close your PC
Reconnect all cables if you had replaced the new hard driveand work has been done.
Step 14- Plug back your computer and turn your computer
If you hear about the noise of beeps and jarring then turn off your computer immediately.
Step 15- installing an operating system
You are required to install an empty hard drive in your operating system before using the computer.
How to replace and upgrade the hard drive in a desktop for window installation
There are some steps to replace and upgrade the hard drive you have to follow them.
How to install the hard drive in pc
Step 1- save your data
Before replacing the new hard drive with the old one, you can store your data like programs, documents, files, movies and music files, playlists and games, etc. you can resemble your data, your original discs, files for reinstalling.
Step 2- Create a recovery disc
Create a recovery disc if you want to reinstall the drivers on your computer. Before replacing, you make sure that you have enough space on your storage disc or drive.
Step 3- Remove the old hard drive from your computer
First of all, turn off your computer and disconnect the all cables. You can wear the wristband and you can use an anti-static mat too. These tools ground the computer and you. It keeps you from getting destroy you or your computer.
Step 4- Place the new drive with the old one
Plug-in power connectors according to the new documentation of hard drive. Follow up with the data connections. A small flashlight can help you for seeing into a small space of places as you work. Replace the screws that hold the drive into the panel of the computer. Replace the case door of the computer. Now you are ready to set up a new hard drive.
Step 5- Reinstall all programs and documents
Now your computer is working on the new drive. You can start the process and your work on it. You can reinstall all your files, documents, programs, and videos, etc. your cloud backup should access by using the software which is recommended to store or retrieve all data.
Step 6- Cloning the hard drive
After saving the data in the hard drive from the existing drive is called a clone. You can assume that your hard drive failure is caused by a physical fault or a corrupted file. You can connect the old drive with the new drive. You can use cloning software to transfer the exact copy of the data.
Step 7- close your panel of computer
After replacing the new hard drive with an old hard drive then you can close the case of your computer tightly.
The risk for installing the hard drive on the PC
- There are some drawbacks you need to know about it before installing the new hard drive for window 10.
- BE PATIENT! If you don’t know about the specification of the hard drive then you should never be done the work by yourself. You can take some time to know that how your computer model is configured.
- You should work on an anti-static surface if you are working with the power supply because failing the ground on your computer can cause data loss and injuries.
- If you know about the basic mechanical tasks then installing the new hard drive on your PC is not a difficult task.
- You can save your money by doing it yourself.